toshiba satellite A300, A305 keyboard

Like others toshiba satellite keyboard, the toshiba satellite A300, A305 series keyboard is finish is classic glossy. Black toshiba A300, A305 keyboard is very pretty, but when click the keyboard, it is a a little slippery. . You can find the write keyboards on the right side(include Home, PgDn, PgUp, and End buttons). Above the keyboard and centered between sharp looking Harmon/Kardon speakers are media control buttons.

Now, I will tell you how to removing toshiba A300, A305 keyboard

STEP 1

Start laptop disassembly with removing the battery.

First, I'll remove the keyboard.
Carefully lift up the keyboard bezel with a small flathead screwdriver.

STEP 2

Remove keyboard bezel

STEP 3

Remove two keyboard screws

STEP 4

Carefully lift up the keyboard.
The keyboard is connected to the motherboard via a flat ribbon cable.
Before you can pull the cable, you have to unlock the keyboard.

STEP 5

Using your finger nails carefully move the white connector tab about 2-3 millimeters up as it shown on the picture.
Release the cable and remove the keyboard.

STEP 6

Remove memory cover.
Remove hard drive cover.
Remove blank cover.

STEP 7

Remove both memory modules.

STEP 8

In order to disconnect the hard drive from the motherboard, you'll have to pull it to the left side.
After the hard drive is disconnected, you can remove it from the laptop.