HP ZV5000 ZX5000 ZV6000 LCD Hinges

New Original HP ZV5000, ZV6000, ZX5000 Series 15.4" LCD Hinges
Left & Right Hinge set For 15.4" Display,Brand New
mpatible Code:AMHR631F010, AMHR631J010, HR63 PA 154

Repair For HP DV9000 laptop hinges Steps(10,11,12,13)

step 10

Mix up a small batch of epoxy. (you must mix the 2 parts thouroughlyand work quickly so it dont set or you will not get the proper bonding strength) Smear a good amount of epoxy onto the hinge at the contactpoints and clamp without throwing off the shape of the hinge. Use about3 to 4 mini clamps. Allow about 10 minutes for the epoxy to set. If youare the patient type let it sit longer,cant hurt.

step 11

Now that the epoxy has set remove the clamps on the arm. If you havea center punch mark 2-3 points where you will drill for your pop rivots inthe center of the arm. Push pop rivots from the outside of thehinge arm inwards to LCD.

step 12

You will now haveto drill through the back of the hinge out the bracket the small holes forthe original screws to fit. Then bore the front face of the bracket witha 3/16" bit (unless you have the exact size bit for head to recessso the screws will reach through) Go SLOW! DONT over drill, you do notwant to go into the hinge at all!

step 13

Now grind the bracket so it takes shape with the arm also shearingdown the pop rivots smooth on the LCD side of the arm. Then, althoughI didnt do this on mine because I wanted it to have the most strength,you may want to so the face bezel fits completely closed when yousnap it back on later in step 16. Grind down the top edge of the frontface of the bracket to the top of the hinge.